CGPKF - AG-CU-ZN-CD BRAZING ALLOY-SILVALOY 50
- MSDS: CGPKF
- Manufacturer: ALLIED SUPPLY CORP
- Product Name: AG-CU-ZN-CD BRAZING ALLOY-SILVALOY 50
- National Stock Number: 3439-00N083004
Product Identification
Product ID:AG-CU-ZN-CD BRAZING ALLOY-SILVALOY 50
MSDS Date:07/01/1986
FSC:3439
NIIN:00N083004
MSDS Number: CGPKF
Responsible Party
US
Emergency Phone: 414-723-2646
Info Phone: 414-723-2646
Cage: 0F6U6
Contractor
Telephone: 414-723-5455
Cage: 0F6U6
Ingredients
SILVER; (AG) (SARA 313) (CERCLA)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 50%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER; (CU) (SARA 313) (CERCLA)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 15.5%
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2 MG/M3 FUME
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC; (ZN) (SARA 313) (CERCLA)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 16.5%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CADMIUM; (CD) (SARA 313) (CERCLA)
CAS: 7440-43-9
RTECS: EU9800000
Fraction By Weight: 18%
OSHA PEL 0.2 MG/M3 DUST
ACGIH TLV: 0.01 MG/M3 DUST
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE INHALATION OF DUST OR FUMES
CAN PRODUCE IRRITATION AND INFLAMMATION OF RESPIRATORY TRACT AND
LUNG TISSUE CAUSING PULMONARY EDEMA, BRONCHITIS, PNEUMONITIS, ETC.
INGESTION AND INHALATION WILL CAUSE VOMITING, DIARRHEA, HEADACHE,
DIZZINESS, FEVER, CHEST PAINS AND BREATHLESSNESS. CRHONIC (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:CADMIUM: IARC MONO, VOL 58, PG 119,
1993:GROUP 1. NTP 7TH ANNUAL REPORT ON CARCINOGENS, 1994:ANTIC TO
BE CARCINOGEN.
Effects of Overexposure:HLTH HAZ: EXPOSURE CAN PRODUCE KIDNEY DAMAGE
AND EMPHYSEMA; OVEREXPOSURE CAN BE FATAL.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS.
First Aid
First Aid:INGEST: CALL MD IMMED . EYES: IMMED FLUSH W/POTABLE WATER FOR
A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN: FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD . INHAL: REMOVE VICTI M OF
EXCESSIVE FUME EXPOS FROM HEATED ALLOY TO FRESH AIR. RESTORE &/OR
SUPPORT BREATHING AS NEEDED. HAVE TRAINED PERSON ADMINISTER OXYGEN
IF BREATHING IS DIFFERENT. KEEP WARM & AT REST. CONTACT MD.
Fire Fighting
Extinguishing Media:THIS IS A NONFLAMMABLE MATERIAL. USE EXTINGUISHERS
WHICH ARE APPROPRIATE FOR THE SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC FUMES AND VAPORS CAN BE EMITTED
FROM THIS METAL ALLOY IF HEATED TO MOLTEN CONDITION IN A FIRE
SITUATION.
Accidental Release
Spill Release Procedures:NO PROBLEMS KNOWN IN COLLECTION OF ALLOY
(WIRE, ROD OR STRIP FORMS FOR EXAMPLE). USE, RECLAIM OR SCRAP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE CAREFULLY IN A CLEAN, DRY PLACE
TO PREVENT CONTAMINATION.
Other Precautions:PROVIDE GENERAL & LOCAL EXHAUST VENTILATION W/FILTER.
MAINTAIN AIR OF 100 LFM IN BRAZING ZONE. IN CONFINED AREAS, NIOSH
APPROVED AIR-SUPPLIED OR SELF-CONTAINED BREATHING EQUIPMENT IS
REQUIRED BY WORKE RS IF VENTILATION IS NOT ADEQUATE.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS, NIOSH APPROVED AIR-SUPPLIED
OR SELF-CONTAINED BREATHING EQUIPMENT IS REQUIRED BY WORKERS IF
VENTILATION IS NOT ADEQUATE.
Ventilation:MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR NONFLAMMABLE PROTECTIVE CLOTHING FOR TORCH BRAZING.
Work Hygienic Practices:NOT APPLICABLE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:1200F,649C
Vapor Pres:NEGLIGIBLE
Spec Gravity:4.5-5.0(H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC WIRE, ROD OR STRIP; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:AVOID OVERHEATING WHILE BRAZING TO
MINIMIZE CADMIUM AND ZINC.
Hazardous Decomposition Products:CADMIUM OR ZINC VAPORS WHILE BRAZING.
Disposal
Waste Disposal Methods:CONSIDER POSSIBLE RECLAIM VALUE. SCRAP ALLOY CAN
BE DISPOSED OF THRU LICENSED WASTE DISP COMPANY I/A/W FEDERAL,
STATE & LOCAL REGULATIONS. THE SAFE DISPOSAL OF COLLECTED FUME
PARTICULATES & EXHAUST VE NTILATION SYSTEM MUST ALSO BE CONSIDERED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.